Netgear GSM4248P User Manual - Page 323

AV Line of Fully Managed Switches M4250 Series Main User Manual 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Switching > MRP > Advanced > MVRP Statistics. The MVRP Statistics page displays. 6. Select whether to display physical interfaces, LAGs, or both by clicking one of the following links above the table heading: • 1: Only physical interfaces are displayed. This is the default setting. • LAG: Only LAGs are displayed. • All: Both physical interfaces and LAGs are displayed. 7. To refresh the page, click the Refresh button. 8. To clear the statistics, do the following: a. Select the check box next to the interface or interfaces, or, to clear the statistics for all interfaces, select the check box in the table heading. b. Click the Clear button. The statistics are cleared. 9. To save the settings to the running configuration, click the Save icon. The following table describes the nonconfigurable fields on the page. Table 86. MVRP statistics information Field MVRP Global Statistics Frames Received Bad Header Bad Format Frames Transmitted Description The number of MMRP frames that were received on the switch. The number of MMRP frames with bad headers that were received on the switch. The number of MMRP frames with bad PDUs body formats that were received on the switch. The number of MMRP frames that were transmitted on the switch. Configure Switching Information 323 Main User Manual