Netgear GSM4248P User Manual - Page 307

AV Line of Fully Managed Switches M4250 Series Main User Manual Table 80. LAG configuration information Field LAG Description LAG ID Configured Ports Down Ports LAG State Automatic LAG Description The description that you might have added to the LAG (see Add port, LAG, and VLAN descriptions on page 297 or Configure a single LAG and its membership on page 307). The LAG ID. The interfaces that are members of the LAG. The interfaces that are members of the LAG but that are down. Indicates if the LAG link is up or down. Indicates if the LAG is manually (No) or automatically (Yes) created. Configure a single LAG and its membership You can configure a single LAG and add physical interfaces as members to the LAG. The information about configuring the LAG is identical to the information in Configure the LAG settings on page 305, but the information about adding members to the LAG is unique in the following section. To configure a single LAG and its membership: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Switching > LAG > LAG Membership. The LAG Membership page displays. 6. From the LAG ID menu, select the LAG. Configure Switching Information 307 Main User Manual