Netgear GSM4248P User Manual - Page 87

AV Line of Fully Managed Switches M4250 Series Main User Manual Table 21. SDM hardware resources Template Name Models Supported Number of IPv4 Entries Number of IPv6 Entries IPv4-Basic All models 90% of total available 10% of total available IPv6-Basic All models 10% of total available 90% of total available IPv4-Advanced M4250-16XF 90% of total available 10% of total available IPv6-Advanced M4250-16XF 10% of total available 90% of total available The main UI provides more information about the templates (see the steps in this task). The default SMD is IP4v-Basic. You can change the SDM template for the switch. To change the SDM template 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select System > Management > SDM Template Preference. The SDM Template Preference page displays. 6. From the SDM Next Template ID menu, select a template. By default, the IPv4-Basic template is selected. 7. Click the Apply button. Your settings are saved. 8. To save the settings to the running configuration, click the Save icon. 9. To activate the new template, restart the switch. The following table displays Summary information. Configure Switch System 87 Information Main User Manual