Netgear GSM4248P User Manual - Page 84

AV Line of Fully Managed Switches M4250 Series Main User Manual Note: If you do not select a DNS server, all the DNS servers are removed after you click the Delete button. 7. Click the Delete button. The DNS server is removed. 8. To save the settings to the running configuration, click the Save icon. Configure and view host name-to-IP address information You can manually map host names to IP addresses or view dynamic host mappings. Add a static entry to the dynamic host mapping table To add a static entry to the local dynamic host mapping table: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select System > Management > DNS > Host Configuration. The Host Configuration page displays. 6. In the Host Name field, specify the static host name. The maximum length of the name is 255 characters. 7. In the IP Address field, enter the IP address to associate with the host name. 8. Click the Add button. The entry displays in the Dynamic Host Mapping table. 9. To save the settings to the running configuration, click the Save icon. Configure Switch System 84 Information Main User Manual