Netgear GSM4248P User Manual - Page 622

AV Line of Fully Managed Switches M4250 Series Main User Manual Field Interface MAC Address VLAN ID IPv6 Address Filter Type Description The interface on which the IPv6SG source binding was learned. The MAC address associated with the IPv6SG source device. This is the key to the binding database. The VLAN ID for the interface of the IPv6SG source device. The IPv6 address of the IPv6SG source device. The filter type used on the switch interface. Either IPv6SG is configured to function with the source IPv6 address only or, if port security is also enabled for IPv6SG, with both the source IPv6 address and MAC address. 11. To save the settings to the running configuration, click the Save icon. 12. To clear all dynamic bindings from the Dynamic Binding Configuration table, click the Clear button. 13. To save the settings to the running configuration, click the Save icon. Remove a static IPv6 source guard binding You can remove a static binding from the IPv6 source guard (IPv6SG) bindings database. To remove a static IPv6SG binding: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Security > Control > IPv6 Source Guard > Binding Configuration. The Binding Configuration page displays. 6. In the Static Binding Configuration table, select the check box for the static binding. 7. Click the Delete button. Manage Switch Security 622 Main User Manual