Netgear GSM4248P User Manual - Page 181

AV Line of Fully Managed Switches M4250 Series Main User Manual To configure or display upstream and downstream interfaces for a link dependency group: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select System > Link Dependency > Link Dependency Interface Configuration. The Link Dependency Interface Configuration page displays. 6. In the Link Dependency Group ID section, from the Group ID menu, select the group ID for which you want to display or configure the settings. Note: The group IDs are not associated with interface numbers. 7. In the Link Dependency Interface Configuration section, select whether to display physical interfaces, LAGs, or both by clicking one of the following links above the table heading: • 1: Only physical interfaces are displayed. This is the default setting. • LAG: Only LAGs are displayed. • All: Both physical interfaces and LAGs are displayed. 8. Select one or more interfaces by taking one of the following actions: • To configure a single interface, select the check box associated with the interface, or type the interface number in the Go To Interface field and click the Go button. • To configure multiple interfaces with the same settings, select the check box associated with each interface. • To configure all interfaces with the same settings, select the check box in the heading row. 9. From the Downstream Interface menu, select if the interface is a member of the group's downstream list. Configure Switch System 181 Information Main User Manual