Netgear GSM4248P User Manual - Page 722

AV Line of Fully Managed Switches M4250 Series Main User Manual 8. Click the Apply button. Your settings are saved. 9. To save the settings to the running configuration, click the Save icon. Configure the switch as an RSPAN source switch You can configure the switch as an RSPAN source switch that sends traffic to another switch that functions as an RSPAN destination switch. You can create up to four RSPAN source switch configurations. To configure the switch as an RSPAN source switch: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Monitoring > Mirroring > RSPAN Source Switch Configuration. The RSPAN Source Switch Configuration page displays. 6. From the Session ID menu, select 1, 2, 3, or 4 as the RSPAN source switch session ID. You can set up four RSPAN source switch configurations that functions independently from each other. 7. Enable or disable the RSPAN source switch configuration by selecting one of the following Admin Mode radio buttons: • True: The selected source interfaces are mirrored. That is, traffic entering or leaving the source interfaces is copied (mirrored) to the selected RSPAN destination VLAN. • False: The selected source interfaces are not mirrored. 8. From the RSPAN Destination VLAN menu, select the destination VLAN to which traffic must be copied. Monitor the Switch and Network 722 Main User Manual