Netgear GSM4248P User Manual - Page 201

AV Line of Fully Managed Switches M4250 Series Main User Manual • T (tagged) member: The LAG is added as a tagged member of the VLAN. • U (untagged) member: The LAG is added as an untagged member of the VLAN. • Excluded member: By default, the selection is blank, which means that the LAG is excluded from the VLAN. A LAG that is excluded can still be dynamically added to the VLAN through GVRP. 10. Click the Apply button. Your settings are saved. 11. To save the settings to the running configuration, click the Save icon. The following table describes the nonconfigurable fields on the page. Table 52. Advanced VLAN Membership Field VLAN Name VLAN Type Definition The name for the VLAN. The type of the VLAN you selected: • Default (VLAN ID = 1): Always present. • Static: A VLAN that you added manually. • Dynamic: A VLAN that was created through GVRP registration and that you did not convert to static, and that GVRP can therefore remove. View the VLAN status on the switch You can view the status of all configured VLANs. To view the VLAN status on the switch: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. Configure Switching Information 201 Main User Manual