Netgear GSM4248P User Manual - Page 348

AV Line of Fully Managed Switches M4250 Series Main User Manual To configure one or more IPv4 routing interfaces: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Routing > IP > Advanced > IP Interface Configuration. The IP Interface Configuration page displays. 6. Select whether to display physical interfaces, VLANs, or both by clicking one of the following links above the table heading: • 1: Only physical interfaces are displayed. This is the default setting. • VLANS: Only VLANs are displayed. • All: Both physical interfaces and VLANs are displayed. 7. Select one or more interfaces by taking one of the following actions: • To configure a single interface, select the check box associated with the interface, or type the interface number in the Go To Interface field and click the Go button. • To configure multiple interfaces with the same settings, select the check box associated with each interface. • To configure all interfaces with the same settings, select the check box in the heading row. 8. In the Description field, enter a description for the interface. 9. From the IP Address Configuration Method menu, select the method by which an IP address is configured on the interface: None, Manual, or DHCP. By default, the method is None. Use the None method to reset the DHCP method. Note: When you change the configuration method from DHCP to None, a minor delay occurs before the page refreshes. Manage Routing 348 Main User Manual