Netgear GSM4248P User Manual - Page 310

AV Line of Fully Managed Switches M4250 Series Main User Manual 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Switching > 802.1AS > Basic > 802.1AS Configuration. The 802.1AS Configuration page displays. 6. To enable the feature, select the 802.1AS status Enable radio button. 7. In the Local Clock Priority1 field, specify the first priority value of the local clock. The local clock is the clock for the switch as a time-aware bridge. Enter a number between 0 and 255 seconds. The default is 255 seconds. 8. In the Local Clock Priority2 field, specify the second priority value of the local clock. Enter a number between 0 and 255 seconds. The default is 248 seconds. 9. Click the Apply button. Your settings are saved. 10. To save the settings to the running configuration, click the Save icon. The following table describes the nonconfigurable information displayed on the page. Table 81. 802.1AS configuration information Field GrandMaster Capable Best Clock Identity Best Clock Priority1 Best Clock Priority2 Steps to Best Clock Local Clock Identity Description Identifies whether the grandmaster clock is active. The default is False. The MAC address of the best clock that the switch detected. The first priority value of the best clock that the switch detected. The second priority value of the best clock that the switch detected. The number of links between the best clock and the switch. If the switch itself is the best clock, the value is zero. The MAC address of the local clock on the switch. Configure Switching Information 310 Main User Manual