Netgear GSM4248P User Manual - Page 724

AV Line of Fully Managed Switches M4250 Series Main User Manual • Rx: Ingress (received) traffic only is mirrored. This option is not available for a VLAN. • Tx: Egress (transmitted) traffic only is mirrored. This option is not available for a VLAN. 12. Click the Apply button. Your settings are saved. If the port is configured as a source port, the Status field displays Mirrored. 13. To save the settings to the running configuration, click the Save icon. Configure the switch as an RSPAN destination switch You can configure the switch as an RSPAN destination switch that receives traffic from another switch that functions as an RSPAN source switch. You can create up to four RSPAN destination switch configurations. To configure the switch as an RSPAN destination switch: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Monitoring > Mirroring > RSPAN Destination Switch Configuration. The RSPAN Destination Switch Configuration page displays. 6. From the Session ID menu, select 1, 2, 3, or 4 as the RSPAN destination switch session ID. You can set up four RSPAN destination switch configurations that functions independently from each other. 7. Enable or disable the RSPAN destination switch configuration by selecting one of the following Admin Mode radio buttons: Monitor the Switch and Network 724 Main User Manual