Netgear GSM4248P User Manual - Page 712

AV Line of Fully Managed Switches M4250 Series Main User Manual Syslog and log server host settings You can let the switch send log messages to one or more servers, that is, to remote logging hosts. A remote log server is the same as a remote syslog host. You must enable the server log on the switch and specify one or more remote syslog host Configure the syslog settings To configure the syslog settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Monitoring > Logs > Server Log. The Server Log page displays. 6. Select one of the following Admin Status radio buttons: • Enable: The switch sends log messages to all configured syslog servers. • Disable: The switch stops sending log messages all configured syslog servers. 7. In the Local UDP Port field, specify the port number that the switch uses to send log messages to the syslog servers. The range is from 1 to 65535. The default port is 514. 8. From the Source Interface menu, select the source interface or VLAN that must be used for syslog communication: • None: The primary IP address of the originating (outbound) interface is used as the source address. • Routing interface: The primary IP address of a physical port is used as the source address. Monitor the Switch and Network 712 Main User Manual