Netgear GSM4248P User Manual - Page 731

AV Line of Fully Managed Switches M4250 Series Main User Manual The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select System > License > License Key. The License Key page displays. The following table describes the nonconfigurable fields on the page. Table 174. License key information Field License Date License Copy License Status Description The date the license was purchased and issued. The number of licenses (0 or 1). Indicates if the license is valid and if the license is active or inactive Note: A valid license might be installed, but you might need to activate the license or restart the switch to activate the license. Description Indicates if the switch must be restarted to activate a valid license that is installed on the switch. Display features to which the license applies You can view the features that are covered by the license. Without a valid license, you cannot use the MRP, MMRP, MVRP, MSRP, and DOT1AS features on the switch. To display features to which the license applies: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. Monitor the Switch and Network 731 Main User Manual