Netgear GSM4248P User Manual - Page 26

AV Line of Fully Managed Switches M4250 Series Main User Manual Log in to the main UI with a known IP address If you did not assign a static IP address to the switch but let a DHCP server in your network assign an IP address to switch, determine the IP address by accessing the DHCP server or by using an IP scanner utility. The procedures in this manual assume that you know the IP address of your switch. To use a known IP address to access the switch over the main UI: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. Main UI buttons and user-defined fields The following table shows the command buttons that are used on the pages in the main UI: Table 1. Main UI command buttons Button Add Apply Cancel Delete Refresh Function Clicking the Add button adds the new item configured in the heading row of a table. Clicking the Apply button sends the updated configuration to the switch. Configuration changes take effect immediately. Clicking the Cancel button cancels the configuration on the page and resets the data on the page to the previous values of the switch. Clicking the Delete button removes the selected item. Clicking the Refresh button refreshes the page with the latest information from the device. Get Started with the Main UI 26 Main User Manual