Netgear GSM4248P User Manual - Page 613

AV Line of Fully Managed Switches M4250 Series Main User Manual Configure DHCPv6 snooping persistent settings You can configure the persistent location of the DHCPv6 snooping bindings database. The bindings database can be stored locally on the switch or on a remote device in the network. The switch must be able to reach the IP address of the remote device to send bindings to a remote database. To configure DHCPv6 snooping persistent settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Security > Control > DHCPv6 Snooping > Persistent Configuration. The Persistent Configuration page displays. 6. Specify where the DHCPv6 snooping bindings database is located. • Local: The binding table is stored locally on the switch. • Remote: The binding table is stored on a remote TFTP server. If the database is stored on a remote server, specify the following information: • Remote IP Address: Specify the IP address of the TFTP server. • Remote File Name: Specify the file name of the DHCPv6 snooping bindings database in which the bindings are stored. 7. In the Write Delay field, specify the time that the switch must wait after writing binding information to persistent storage. The delay allows the switch to collect as many entries as possible (new and removed) before writing them to the persistent file. You can specify from 15 to 86400 seconds. By default, the delay is 300 seconds. 8. Click the Apply button. Your settings are saved. Manage Switch Security 613 Main User Manual