Netgear GSM4248P User Manual - Page 239

AV Line of Fully Managed Switches M4250 Series Main User Manual To delete an MST instance: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Switching > STP > Advanced > MST Configuration. The MST Configuration page display. 6. Select the check box that is associated with the MST instance. 7. Click the Delete button. The MST instance is deleted. 8. To save the settings to the running configuration, click the Save icon. Configure and display the interface settings for an MST instance You can configure and display the interface settings for a Multiple Spanning Tree (MST) instance. An interface can become diagnostically disabled (D-Disable) when a severe error condition occurs for DOT1S. The most common cause is when BPDU flooding occurs. The flooding criteria are such that DOT1S receives more than 15 BPDUs in a 3-second interval. (Other causes for a DOT1S D-Disable condition are very rare.) To configure and display the port settings for an MST instance: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. Configure Switching Information 239 Main User Manual