Netgear GSM4248P User Manual - Page 270

AV Line of Fully Managed Switches M4250 Series Main User Manual To configure MLD snooping automatically: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Switching > Multicast > MLD Snooping > Configuration. The Configuration page displays. 6. Select the MLD Plus Mode Enable or Disable radio button. If enabled, the following MLD snooping modes are automatically enabled: • MLD Snooping Admin mode • Exclude Mrouter Interface Mode The default is Enable. If disabled, these MLD snooping modes are automatically disabled. Note: For information about other settings on the page, see Configure MLD snooping manually on page 271. 7. Click the Apply button. Your settings are saved. 8. To save the settings to the running configuration, click the Save icon. 9. To refresh the page, click the Refresh button. The following table describes the nonconfigurable fields on the page. Configure Switching Information 270 Main User Manual