Netgear GSM4248P User Manual - Page 586

AV Line of Fully Managed Switches M4250 Series Main User Manual 9. To save the settings to the running configuration, click the Save icon. Private VLAN promiscuous interface: Assign the interface to primary and secondary VLANs If you configure the private VLAN port mode of an interface as Promiscuous (see Configure the private VLAN port mode on page 581), you can assign the interface to a single primary VLAN and to one or more secondary VLANs. To assign a private VLAN promiscuous interface to a primary VLAN and secondary VLANs: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Security > Traffic Control > Private VLAN > Private VLAN Promiscuous Interface Configuration. The Private VLAN Promiscuous Interface Configuration page displays. 6. Select whether to display physical interfaces, LAGs, or both by clicking one of the following links above the table heading: • 1 (the unit ID of the switch): Only physical interfaces are displayed. This is the default setting. • LAG: Only LAGs are displayed. • All: Both physical interfaces and LAGs are displayed. 7. Select one or more interfaces by taking one of the following actions: • To configure a single interface, select the check box associated with the port, or type the port number in the Go To Interface field and click the Go button. • To configure multiple interfaces with the same settings, select the check box associated with each interface. Manage Switch Security 586 Main User Manual