Netgear GSM4248P User Manual - Page 606

AV Line of Fully Managed Switches M4250 Series Main User Manual 8. Click the Apply button. Your settings are saved. 9. To save the settings to the running configuration, click the Save icon. Display or clear DHCP snooping statistics You can display and clear per-interface statistics about the DHCP messages filtered by the DHCP snooping feature on untrusted interfaces. To display or clear the DHCP snooping statistics: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Security > Control > DHCP Snooping > Statistics. The Statistics page displays. 6. Select whether to display physical interfaces, LAGs, or both by clicking one of the following links above the table heading: • 1 (the unit ID of the switch): Only physical interfaces are displayed. This is the default setting. • LAG: Only LAGs are displayed. • All: Both physical interfaces and LAGs are displayed. 7. Click the Clear button to clear all interfaces statistics. 8. To save the settings to the running configuration, click the Save icon. The following table describes the DHCP snooping statistics. Manage Switch Security 606 Main User Manual