Netgear GSM4248P User Manual - Page 40

AV Line of Fully Managed Switches M4250 Series Main User Manual 6. To refresh the page, click the Refresh button. The following table describes the nonconfigurable Temperature Status information. Table 6. Temperature Status information Field Unit ID Sensor Description Temperature (C) State Max Temp (C) Description The unit ID of the switch in which the sensor is installed. This ID is always 1. The ID of the sensor. The description of the sensor. The temperature of the sensor in Celsius. The state of the sensor: Operational or Failure. The maximum supported operating temperature in Celsius. View the device status and firmware version You can view the device status and firmware version. To view the device status and firmware version: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Scroll down to the Temperature Status section. 6. To refresh the page, click the Refresh button. The following table describes the nonconfigurable Device Status information. Configure Switch System 40 Information Main User Manual