Netgear GSM4248P User Manual - Page 753

AV Line of Fully Managed Switches M4250 Series Main User Manual The System Information page displays. 5. Select Maintenance > Image Management > Copy. The Copy page displays. 6. Select the Source Image Image1 or Image2 radio button to specify the image to be copied. 7. Select the Destination Image Image1 or Image2 radio button to specify the destination image. 8. Click the Apply button. The image is copied. 9. To save the settings to the running configuration, click the Save icon. Configure dual image settings The Dual Image feature allows the switch to retain two images in permanent storage. You can select which image must be loaded when the reboots, specify an image description, or delete an image. This feature reduces switch down time when you are upgrading or downgrading the software image. Change the software image that loads when the switch starts or reboots To change the image that loads during the boot process: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Maintenance > Image Management > Dual Image Configuration. The Dual Image Configuration page displays. 6. Select the check box for the image that is not the active image (that is, the image for which the Active Image fields shows False) but that you want the switch to run after it reboots. Maintenance and Troubleshooting 753 Main User Manual