Netgear GSM4248P User Manual - Page 759

AV Line of Fully Managed Switches M4250 Series Main User Manual If a reply to the traceroute is received, the following message displays: traceroute to x.y.z.w (x.y.z.w), maxTTL hops max, size byte packets initTTL x.y.z.w (x.y.z.w) 0.000 ms * 0.000 ms initTTL+1 x.y.z.w (x.y.z.w) 0.000 ms * 0.000 ms initTTL+2 x.y.z.w (x.y.z.w) 0.000 ms * 0.000 ms To send an IPv4 traceroute: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Maintenance > Troubleshooting > Traceroute IPv4. The Traceroute IPv4 page displays. 6. In the IP Address/Hostname field, enter the IP address or host name of the device for which the path must be discovered. 7. In the Probes Per Hop field, enter the number of probes per hop. The default value is 3. The range is from 1 to 10. 8. In the Max TTL field, enter the maximum time to live (TTL) for the destination. The default value is 30. The range is from 1 to 255. 9. In the Init TTL field, enter the initial TTL to be used. The default value is 1. The range is from 1 to 255. 10. In the MaxFail field, enter the maximum number of failures allowed in the session. The default value is 5. The range is from 1 to 255. 11. In the Interval (secs) field, enter the time between probes in seconds. The default value is 3. The range is from 1 to 60. Maintenance and Troubleshooting 759 Main User Manual