Netgear GSM4248P User Manual - Page 153

AV Line of Fully Managed Switches M4250 Series Main User Manual For more information about the settings, see Add an SNMPv1 and SNMPv2 community on page 151. 8. Click the Apply button. Your settings are saved. 9. To save the settings to the running configuration, click the Save icon. Delete an SNMPv1 and SNMPv2 community You can delete an SNMPv1 and SNMPv2 community that you no longer need. To delete an SNMPv1 and SNMPv2 community: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select System > SNMP > SNMP V1/V2 > Community Configuration. The Community Configuration page displays. 6. Select the check box next to the community. 7. Click the Delete button. The community is deleted. 8. To save the settings to the running configuration, click the Save icon. Manage the SNMPv1 and SNMPv2 trap settings For each SNMP community, you can specify the source interface that must be used on the switch, the community name, the associated IP address, and other settings. Add an SNMPv1 or SNMPv2 trap configuration for a host You can add a trap configuration for a host, enabling the host to receive SNMPv1 or SNMPv2 traps. Configure Switch System 153 Information Main User Manual