Netgear GSM4248P User Manual - Page 696

AV Line of Fully Managed Switches M4250 Series Main User Manual 9. To refresh the page, click the Refresh button. 10. To save the settings to the running configuration, click the Save icon. The following table describes the per-port statistics displayed on the page. Table 166. Port statistics information Field Description Interface The interface. Total Packets Received Without Errors The total number of packets that were received without errors. Packets Received With Error The number of inbound packets that contained errors, preventing them from being delivered to a higher-layer protocol. Broadcast Packets Received The number of good packets received that were directed to the broadcast address. This does not include multicast packets. Packets Transmitted Without Errors The number of frames that were transmitted by this port to its segment. Transmit Packet Errors The number of outbound packets that could not be transmitted because of errors. Collision Frames The best estimate of the total number of collisions on this Ethernet segment. Link Down Events The total number of link down events on the port. Link Flaps The number of occurrences of link-down-to-link up events (that is, one link flap) during the debouncing time. Received Rate (Mbps) The received data rate in Mbps. Transmitted Rate (Mbps) The transmitted data rate in Mbps. Received Error Rate The received data rate with errors in Mbps. Transmitted Error Rate The transmitted data rate with errors in Mbps. Packets Received Per Second The number of received packets per second. Packets Transmitted Per Second The number of transmitted packets per second. Time since counters last cleared The elapsed time in days, hours, minutes, and seconds since the statistics for this port were last cleared. Display or clear detailed statistics for a port For a specific port, you can display a variety of per-port traffic statistics or clear the statistics. Monitor the Switch and Network 696 Main User Manual