Netgear GSM4248P User Manual - Page 61

AV Line of Fully Managed Switches M4250 Series Main User Manual 5. Select System > Management > Management Interfaces > IPv6 Management VLAN Configuration. The IPv6 Management VLAN Configuration page displays. 6. To add an IPv6 default route address, in the IPv6 Default Route Configuration section, do the following: a. Select the Change IPv6 Default Route check box. b. In the IPv6 Default Route Address field, specify the IPv6 address and prefix length that you want to add. c. Click the Add button. The IPv6 default route address is added to the IPv6 management VLAN. 7. To remove an IPv6 default route address, in the IPv6 Default Route Configuration section, do the following: a. Select the check box for the IPv6 default route address that you want to remove. b. Click the Delete button. The IPv6 default route address is removed from the IPv6 management VLAN. 8. To save the settings to the running configuration, click the Save icon. Configure an IPv6 management interface You can restrict IPv6 management to one specific interface. By default, you can use any of the interfaces as an IPv6 management interface. To configure an IPv6 management interface: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. Configure Switch System 61 Information Main User Manual