Netgear GSM4248P User Manual - Page 172

AV Line of Fully Managed Switches M4250 Series Main User Manual • Network Policy: Select if the interface can send the network policy in an LLDP frame. • Location Identification: Select if the interface can send location information in an LLDP frame. • Extended MDI-PSE: Select if the interface can send power sourcing equipment (PSE) information in an LLDP frame. • Inventory Information: Select if the interface can send inventory information in an LLDP frame. 11. Click the Apply button. Your settings are saved. 12. To save the settings to the running configuration, click the Save icon. Display LLDP-MED local device information You can display LLDP-MED local device information, which is information that the switch itself, or an interface of the switch, advertises. To display LLDP-MED local device information: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select System > LLDP > LLDP-MED > Local Device Information. The Local Device Information page displays. 6. From the Interface menu, select an interface on which the transmission of LLDP-MED frames is enabled. 7. To refresh the page, click the Refresh button. The following table describes the nonconfigurable fields on the page. Configure Switch System 172 Information Main User Manual