Netgear GSM4248P User Manual - Page 769

AV Line of Fully Managed Switches M4250 Series Main User Manual The switch allow ACLs to be bound to physical ports and LAGs. The switch supports MAC ACLs and IP ACLs. MAC ACL sample configuration The following example shows how to create a MAC-based ACL that permits Ethernet traffic from the Sales department on specified ports and denies all other traffic on those ports. 1. On the MAC ACL page, create an ACL with the name Sales_ACL for the Sales department of your network (see Configure a MAC ACL on page 653). By default, this ACL is bound on the inbound direction, which means that the switch examines traffic as it enters the port. 2. On the MAC Rules page, create a rule for the Sales_ACL with the following settings: • Sequence Number: 1 • Action: Permit • Assign Queue ID: 0 • Match Every: False • CoS: 0 • Destination MAC: 01:02:1A:BC:DE:EF • Destination MAC Mask: 00:00:00:00:FF:FF • EtherType: User Value • Source MAC: 02:02:1A:BC:DE:EF • Source MAC Mask: 00:00:00:00:FF:FF • VLAN ID: 2 For more information about MAC ACL rules, see Configure MAC ACL rules on page 656. 3. On the MAC Binding Configuration page, assign the Sales_ACL to 6, 7, and 8, and then click the Apply button. (See Configure MAC bindings on page 660.) You can assign an optional sequence number to indicate the order of this access list relative to other access lists if any are already assigned to this interface and direction. 4. The MAC Binding Table displays the interface and MAC ACL binding information. (See Display or delete MAC ACL bindings in the MAC binding table on page 662.) The ACL named Sales_ACL looks for Ethernet frames with destination and source MAC addresses and MAC masks defined in the rule. Also, the frame must be tagged with VLAN ID 2, which is the Sales department VLAN. The CoS value of the frame must be 0, which is the default value for Ethernet frames. Frames that match this criteria are Configuration Examples 769 Main User Manual