Netgear GSM4248P User Manual - Page 730

AV Line of Fully Managed Switches M4250 Series Main User Manual 8. In the Poller Interval field, specify the number of seconds between successive polling. A sampling interval of 0 disables sampling. The range is from 0 to 86400 seconds. The default is 0 seconds. 9. In the Sampler Receiver Index field, specify the sFlow receiver that must be associated with the sampler. For information about sFlow receivers, see Configure an sFlow receiver on page 727. 10. In the Sampling Rate field, specify the statistical sampling rate for packet sampling. A sampling rate of 1 counts all packets. A sampling rate of 0 disables sampling. The allowed range is 1024 to 65536. The default is 0. 11. In the Maximum Header Size field, specify the maximum number of bytes to be copied from a sampled packet. The range is from 20 to 256 bytes. The default is 128 bytes. 12. Click the Apply button. Your settings are saved. 13. To save the settings to the running configuration, click the Save icon. Display license information The main UM lets you display license information but not add or manage the license. For information about adding and managing a license, see the Audio Video User Manual, which you can download by visiting netgear.com/support/download/. Display license key information You can display information about the installed license key. To display license key information: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. Monitor the Switch and Network 730 Main User Manual