Netgear GSM4248P User Manual - Page 438

AV Line of Fully Managed Switches M4250 Series Main User Manual 8. In the Group Address field, specify the IPv6 address for the group to which the static RP applies. 9. In the Prefix Length field, specify the IPv6 prefix length for the group to which the static RP applies. 10. From the Override menu, select Enable or Disable to enable or disable the override capacity of a static RP over an RP that is learned from a BSR. If you select Enable and conflict occurs, a static RP overrides an RP that is learned from a BSR. 11. Do one of the following: • If you are adding a new static RP, click the Add button. Your settings are saved. The static RP is added. • If you are changing an existing static RP, click the Apply button. Your settings are saved. 12. To save the settings to the running configuration, click the Save icon. Delete a static IPv6 PIM rendezvous point configuration You can delete a static IPv6 PIM rendezvous point (RP) configuration that you no longer need for a group. To delete a static IPv6 PIM RP configuration for a group: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Routing > IPv6 Multicast > IPv6 PIM > Static RP Configuration. The Static RP Configuration page displays. 6. Select the check box for the static RP. 7. Click the Delete button. Configure Multicast Routing 438 Main User Manual