Netgear GSM4248P User Manual - Page 751

AV Line of Fully Managed Switches M4250 Series Main User Manual For an SSL security certificate, you must download two Privacy Enhanced Mail (PEM) files to the switch: • SSL Trusted Root Certificate PEM File: The SSL trusted root certificate PEM file, which must be in the format xxxxCERTxxxxx.pem. • SSL Server Certificate PEM File: The SSL server certificate PEM file (the key file), which must be in the format xxxxKEYxxxxx.pem. Before you can download and install an SSL security certificate, you must disable HTTPS on the switch. To disable HTTPS and use an HTTP session to download and install an SSL security certificate file on the switch: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Security > Access > HTTPS > HTTPS Configuration. The HTTPS Configuration page displays. 6. Select the Admin Mode Disable radio button. 7. Click the Apply button. Your settings are saved. Because you changed the access mode from HTTPS to HTTP, you are logged out of the switch. 8. Wait one minute, refresh your browser, and log back in to the switch. 9. Select Maintenance > Upgrade > HTTP File Upgrade. The HTTP Firmware/File Update page displays. 10. From the File Type menu, select SSL Trusted Root Certificate PEM File. 11. Select the Select File Browse button and locate the file that you want to download. This the certificate file, which must be in the format xxxxCERTxxxxx.pem. Maintenance and Troubleshooting 751 Main User Manual