Netgear GSM4248P User Manual - Page 705

AV Line of Fully Managed Switches M4250 Series Main User Manual Table 168. EAP Statistics information (Continued) Field Description EAPOL Invalid Frames Received The number of EAPOL frames that were received by this authenticator in which the frame type is not recognized. EAPOL Length Error Frames The number of EAPOL frames that were received by this authenticator in which Received the frame type is not recognized. EAP Response/ID Frames Received The number of EAP response/identity frames that were received by this authenticator. EAP Response Frames Received The number of valid EAP response frames (other than resp/ID frames) that were received by this authenticator. EAP Request/ID Frames Transmitted The number of EAP request/identity frames that were transmitted by this authenticator. EAP Request Frames Transmitted The number of EAP request frames (other than request/identity frames) that were transmitted by this authenticator. Perform a cable test You can test and display information about the cables that are connected to switch ports. To perform a cable test: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Monitoring > Ports > Cable Test. The Cable Test page displays. 6. Select the check boxes that are associated with the physical ports for which you want to test the cables. Monitor the Switch and Network 705 Main User Manual