Netgear GSM4248P User Manual - Page 64

AV Line of Fully Managed Switches M4250 Series Main User Manual The IPv6 Management Interface Configuration page displays. 6. To add an IPv6 address, in the IPv6 Management Interface Configuration section, do the following: a. Select the Set Management Interface check box. It is likely that you already did this when you started the configuration of the IPv6 management interface. b. In the IPv6 Prefix field, specify the IPv6 address that you want to add. c. In the Prefix Length field, specify the prefix length for the IPv6 address that you want to add. d. From the EUI64 menu, select Enable to enable the Extended Universal Identifier (EUI) flag for the IPv6 address, or select Disable to omit the flag. e. Click the Add button. The IPv6 address is added to the IPv6 management interface. 7. To remove an IPv6 address, in the IPv6 Management Interface Configuration section, do the following: a. Select the check box for the IPv6 that you want to remove. b. Click the Delete button. The IPv6 address is removed from the IPv6 management interface. 8. To save the settings to the running configuration, click the Save icon. Manage the IPv6 default route addresses for the IPv6 management interface You can add an IPv6 default route address that is specific to the IPv6 management interface. You can also remove an IPv6 default route address that you no longer need for the IPv6 management interface. To add or remove an IPv6 default route address for the IPv6 management interface: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. Configure Switch System 64 Information Main User Manual