Netgear GSM4248P User Manual - Page 139

AV Line of Fully Managed Switches M4250 Series Main User Manual 9. Click the Apply button. Your settings are saved. 10. To save the settings to the running configuration, click the Save icon. The following table describes the nonconfigurable fields on the page. Table 39. PoE information Field Description Firmware Version The firmware version of the PoE software. Power Status The power status. Total Power Available (W) The maximum power in watts the switch can deliver to all ports. Threshold Power (W) If the consumed power is below the threshold power, the switch can power up another port. The consumed power can be between the nominal and threshold power. The threshold power is displayed in watts. Note: The threshold power value is determined by the value that you enter in the System Usage Threshold field. Consumed Power (W) Total power in watts that is being delivered to all ports. Configure the PoE ports settings To configure the PoE ports settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select System > PoE > Advanced > PoE Port Configuration. The PoE Port Configuration page displays. 6. Select one or more ports by taking one of the following actions: Configure Switch System 139 Information Main User Manual