Netgear GSM4248P User Manual - Page 279

AV Line of Fully Managed Switches M4250 Series Main User Manual • To configure a single interface, select the check box associated with the interface, or type the interface number in the Go To Interface field and click the Go button. • To configure multiple interfaces with the same settings, select the check box associated with each interface. • To configure all interfaces with the same settings, select the check box in the heading row. 8. From the Multicast Router menu, select to enable or disable the multicast router option. 9. Click the Apply button. Your settings are saved. 10. To save the settings to the running configuration, click the Save icon. Configure an MLD multicast router VLAN You can configure a specific VLAN for a specific interface to forward snooped MLD packets to the multicast router that is connected to the interface. In most situations, this configuration is not required because the switch automatically detects a multicast router and forwards MLD packets accordingly. This configuration might be required in a complex network if you want to make sure that the multicast router always receives MLD packets from the switch. To configure a multicast router VLAN: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Switching > Multicast > MLD Snooping > Multicast Router VLAN Configuration. The Multicast Router VLAN Configuration page displays. 6. From the Interface menu, select the interface. Configure Switching Information 279 Main User Manual