Netgear GSM4248P User Manual - Page 469

AV Line of Fully Managed Switches M4250 Series Main User Manual Add and configure a DiffServ class To add and configure a DiffServ class: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select QoS > DiffServ > Advanced > Class Configuration. The Class Configuration page displays. 6. In the Class Name field, enter a class name. The Class Name field also lists all existing DiffServ class names, from which you can select one for modification or deletion. The class name can be 1 to 31 alphanumeric characters in length. 7. From the Class Type menu, select one of the following options: • All: All match criteria that you define for the class must be satisfied for a packet match. All signifies the logical AND of all the match criteria. For example, if the class includes one criterion for an IP address and another criterion for a MAC address, the traffic must match both criteria. • Any: Any match criterion that you define for the class must be satisfied for a packet match. For example, if the class includes one criterion for an IP address and another criterion for a MAC address, the traffic must match either one of the criteria but does not need to match both criteria. You can select the class type only when you are creating a new class. After the class is created, you cannot modify the type of class. 8. Click the Add button. The new class is added. 9. After creating the class, click the class name. Configure Quality of Service 469 Main User Manual