Netgear GSM4248P User Manual - Page 45

AV Line of Fully Managed Switches M4250 Series Main User Manual Table 8. Switch statistics information (Continued) Field Most VLAN Entries Ever Used Static VLAN Entries Dynamic VLAN Entries VLAN Deletes Time Since Counters Last Cleared Description The largest number of VLANs that were active on this switch since the last reboot. The number of presently active VLAN entries on this switch that were created statically. The number of presently active VLAN entries on this switch that were created by GVRP registration. The number of VLANs on this switch that were created and then deleted since the last reboot. The elapsed time, in days, hours, minutes, and seconds, since the statistics for this switch were last cleared. View USB device information To display the USB device information: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select System > Management > USB Device Information. The USB Device Information page displays. The Device Status field displays the current status of the device. The status is one of the following: • Active: The device is USB plugged in and recognized by the switch. • Inactive: The device is not mounted. • Invalid: The device is not present or an invalid device is plugged in. 6. To refresh the page, click the Refresh button. Configure Switch System 45 Information Main User Manual