Netgear GSM4248P User Manual - Page 639

AV Line of Fully Managed Switches M4250 Series Main User Manual The CP Binding Table page displays. This table displays the captive portal-to-interface bindings. 6. To delete a captive portal-to-interface binding, do the following: a. Select the check box next to the interface. b. Click the Delete button. The binding is removed. 7. To save the settings to the running configuration, click the Save icon. 8. To refresh the page, click the Refresh button. The following table describes the nonconfigurable information that is displayed. Table 159. Captive portal binding information Field Interface CP ID Operational Status Block Status Authenticated Users Description The interface to which the captive portal is bound. The ID of the captive portal. Indicates if the portal is active on the interface (Disable or Enable). Indicates if the captive portal is temporarily blocked for authentication. The number of users authenticated through the captive portal on the interface. Configure captive portal groups Captive portal groups let you organize captive portal users, which is useful if a large number of users must be able to access a captive portal. After you add a captive portal group, you can add users to the group. By default, all captive portal users are added to the default group with ID 1. You can add up to 10 groups. Add a captive portal group After you add a captive portal group, you can add captive portal users to the group (see Configure captive portal users on page 641). To add a captive portal group: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. Manage Switch Security 639 Main User Manual