Netgear GSM4248P User Manual - Page 519

AV Line of Fully Managed Switches M4250 Series Main User Manual If a previous method times out, the next method is used. For example, the authentication method that you select in the 2 column is tried after the authentication method that select in the 1 column in the previous step. Similarly, the authentication method that you select in the 3 column is tried after the authentication method that you select in the 2 column, and so on. If you select a method that does not time out, the next method is not tried. For the menus in the 2, 3, 4, and 5 columns, in addition to the options described in the previous step, you can also select N/A. With the N/A option (which is the default selection) the authentication method is not used. This option is not available for the menu in the 1 column. 9. Do one of the following: • If you are adding a new list, click the Add button. Your settings are saved. The list is added to the table. • If you are changing an existing list, click the Apply button. Your settings are saved. 10. To save the settings to the running configuration, click the Save icon. Delete an enable authentication list You can delete a custom login authentication list that you no longer need. You cannot delete the enableList and enableNetList. To delete an enable authentication list: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Security > Management Security > Authentication List > Enable Authentication List. The Enable Authentication List page displays. Manage Switch Security 519 Main User Manual