Netgear GSM4248P User Manual - Page 462

AV Line of Fully Managed Switches M4250 Series Main User Manual Configure the CoS WRED precedence settings for dropping packets If you use the Weighted Random Early Detection (WRED) method as the queue depth management method (see Configure CoS queue settings for an interface on page 460), you can configure the precedence settings for dropping packets if a queue is full. These settings apply to a selected interface and a selected queue. You can configure different setting for each queue and for each precedence level on one interface. To configure CoS WRED precedence settings for dropping packets: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select QoS > CoS> Advanced > CoS Queue Drop Precedence Configuration. The CoS Queue Drop Precedence Configuration page displays. 6. From the Interface menu, select an interface. 7. From the Queue ID menu, select a queue from 0 to 7. 8. From the Drop Precedence Level menu, select the drop precedence levels from 1 to 4. Packets to which level 1 applies are the most likely to be dropped. Packets to which level 4 applies are the least likely to be dropped. The following table shows the default values for each drop precedence level. You can modify these settings. Configure Quality of Service 462 Main User Manual