Netgear GSM4248P User Manual - Page 720

AV Line of Fully Managed Switches M4250 Series Main User Manual 10. In the Source Interface Configuration section, select one or more source interfaces and the traffic direction: a. Select which interfaces are displayed on the page: • Unit ID: Displays the physical ports only. • LAG: Displays the LAGs only. • CPU: Displays the CPU only. • VLANS: Displays the VLANs only. • All: Displays all physical ports, LAGs, the CPU, and VLANs. b. Use one of the following methods to select an interface: • In the Go To Interface field, enter the interface in the unit/slot/port format and click on the Go button. • Next to the Interface column, select the check box for the interface or interfaces that you want to include. Note: If an interface is a member of a VLAN and is member of a LAG, you cannot select the VLAN as a source VLAN. However, if an interface is a member of a VLAN that you select as a source VLAN, the interface can be a member of a LAG. c. From the Direction menu, select the direction of the traffic that must be mirrored from the configured source ports. • None: The port (or VLAN) is not mirrored. • Tx and Rx: Both egress (transmitted) and egress (received) traffic is mirrored. For a VLAN, this option select the VLAN as the source VLAN. • Rx: Ingress (received) traffic only is mirrored. This option is not available for a VLAN. • Tx: Egress (transmitted) traffic only is mirrored. This option is not available for a VLAN. 11. Click the Apply button. Your settings are saved. If the port is configured as a source port, the Status field displays Mirrored. If the port is configured as a destination port, the Status field displays Probe. 12. To save the settings to the running configuration, click the Save icon. Monitor the Switch and Network 720 Main User Manual