Netgear GSM4248P User Manual - Page 470

AV Line of Fully Managed Switches M4250 Series Main User Manual The class name is a hyperlink to the page on which you can define the class configuration (see the following figure). 10. Define the criteria that must be associated with the DiffServ class by selecting one of the following radio buttons: • Match Every: Select this radio button to add a match condition that considers all packets to belong to the class. The only selection from the Match Every menu is Any. • Reference Class: Select this radio button to reference another class for criteria. The match criteria defined in the reference class function as match criteria in addition to the match criteria that you define for the selected class. After you select the radio button, the classes that can be referenced are displayed. Select the class to reference. A class can reference only one other class of the same type. • Class of Service: Select this radio button to require the Class of Service (CoS) value in an Ethernet frame header to match the specified CoS value. This option lists all the values for the Class of Service match criterion in the range 0 to 7 from which you can select one. • VLAN: Select this radio button to require a packet's VLAN ID to match a VLAN ID. The VLAN value is in the range from 1 to 4093. • Secondary Class of Service: Select this radio button to require the secondary Class of Service (CoS) value in an Ethernet frame header to match the specified secondary CoS value. Configure Quality of Service 470 Main User Manual