Netgear GSM4248P User Manual - Page 444

AV Line of Fully Managed Switches M4250 Series Main User Manual The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Routing > IPv6 Multicast > MLD > MLD Groups. The MLD Groups page displays. 6. To search for IGMP group entries by interface or group, select one of the following options from the Search menu: • Interface: Select Interface from the menu, specify the interface in unit/port format (for example 0/8), and click the Go button. If the entry exists, the entry is displayed as the first entry, followed by the remaining entries. • Group: Select Group from the menu, specify the multicast group IPv6 address, and click the Go button. If the entry exists, that entry with the matching group IPv6 address is displayed as the first entry, followed by the remaining entries. An exact match is required. 7. To refresh the page, click the Refresh button. The following table describes the nonconfigurable fields on the page. Table 126. MLD groups information Field Interface Group IP Last Reporter Up Time Expiry Time Filter Mode Version 1 Host Timer Group Compat Mode Description The interface on which MLD is enabled. The IP multicast group address. The IP address of the source of the last membership report that was received for the IP multicast group address on the interface. The period elapsed since this entry was created. The period remaining before this entry is aged out. The source filter mode (Include, Exclude, or NA) for the group on the interface. If the mode is NA, the field is blank. The period remaining until the switch determines that no MLD version 1 members are attached to the interface. The compatibility mode (MLDv1 or MLDv2) of the multicast group on the interface. Configure Multicast Routing 444 Main User Manual