Netgear GSM4248P User Manual - Page 395

AV Line of Fully Managed Switches M4250 Series Main User Manual Table 108. Multicast IPv4 Mroute table information Field Description Group IP The destination group IPv4 address. Source IP The IPv4 address of the multicast packet source to be combined with the group IPv4 to fully identify a single route. Incoming Interface The incoming interface on which multicast packets for this source/group arrive. Outgoing Interfaces The list of outgoing interfaces on which multicast packets for this source/group are forwarded. Up Time (hh:mm:ss) The time in seconds since the entry was created. Expiry Time (hh:mm:ss) The time in seconds before this entry ages out and is removed from the table. RPF Neighbor The IPv4 address of the reverse path forwarding (RPF) neighbor. Protocol The multicast routing protocol which dynamically created this entry. The possible values are as follows: • PIM-DM • PIM-SM Flags The value displayed in this field is valid if the multicast routing protocol is PIM-SM. The possible values are RPT and SPT. For other protocols a "------" is displayed. Add static multicast entries to the IPv4 Mroute table You can add a static multicast entry to the IPv4 Mroute table. To add a static multicast entry to the IPv4 Mroute table: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. Configure Multicast Routing 395 Main User Manual