Netgear GSM4248P User Manual - Page 404

AV Line of Fully Managed Switches M4250 Series Main User Manual To display the IGMP groups and search the IGMP group database: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Routing > Multicast > IGMP > IGMP Groups. The IGMP Groups page displays. 6. To search for IGMP group entries by interface or group, select one of the following options from the Search menu: • Interface: Select Interface from the menu, specify the interface in unit/port format (for example 0/8), and click the Go button. If the entry exists, the entry is displayed as the first entry, followed by the remaining entries. • Group: Select Group from the menu, specify the multicast group IPv4 address, and click the Go button. If the entry exists, that entry with the matching group IPv4 address is displayed as the first entry, followed by the remaining entries. An exact match is required. 7. To refresh the page, click the Refresh button. The following table describes the nonconfigurable fields on the page. Table 112. IGMP group information Field Interface Multicast Group IP Last Reporter Description The interface on which IGMP is enabled. The IP multicast group address. The IP address of the source of the last membership report that was received for the IP multicast group address on the interface. Configure Multicast Routing 404 Main User Manual