Netgear GSM4248P User Manual - Page 567

AV Line of Fully Managed Switches M4250 Series Main User Manual Table 151. MAC filter summary information (Continued) Field Description Source Port Members The ports to be used for filtering inbound packets. Destination Port Members The ports to be used for filtering outbound packets. Port security Port security lets you lock one or more ports on the switch. When a port is locked, the port can only forward packets with a source MAC addresses that you specifically allowed. The port discards all other packets. Configure the global port security mode To configure the global port security mode: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Security > Traffic Control > Port Security > Port Administration. The Port Administration page displays. 6. To enable port security on the switch, select the Port Security Mode Enable radio button. The default is Disable. The Port Security Violations table shows information about violations that occurred on ports that are enabled for port security. Manage Switch Security 567 Main User Manual