Netgear GSM4248P User Manual - Page 37

AV Line of Fully Managed Switches M4250 Series Main User Manual • Routing Loopback Interface • Service Port • Different. For some applications from the list, the source interface is configured separately. They display in the list only if this is the case. By default VLAN 1 is used as the source interface. 7. Click the Apply button. Your settings are saved. 8. To save the settings to the running configuration, click the Save icon. The following table describes the status information in the Application Information and System Information sections on the page. Table 4. Application Information and System Information Field Application Information App Name App Status Version System Information Product Name IPv4 Management Address IPv6 Management Address IPv4 Management Interface IPv6 Management Interface IPv4 Loopback Interface IPv6 Loopback Interface System Date System Up Time Description The name of the application that functions as the Universal Plug and Play (UPnP) agent. The status of the application. The version of the application. The product name of this switch. The IPv4 address and mask assigned to the management VLAN interface. The IPv6 address and mask assigned to the management VLAN interface. The IPv4 management VLAN ID of the switch. Click the displayed Management VLAN ID value to jump to the configuration page. See Configure an IPv4 management VLAN on page 49. The IPv6 management VLAN ID of the switch. Click the displayed Management VLAN ID value to jump to the configuration page. See Configure an IPv6 management VLAN on page 56. The IPv4 address and mask assigned to the loopback interface. The IPv6 prefix and prefix length assigned to the loopback interface. The current date. The time in days, hours, and minutes since the switch was restarted. Configure Switch System 37 Information Main User Manual