Netgear GSM4248P User Manual - Page 480

AV Line of Fully Managed Switches M4250 Series Main User Manual Configure a DiffServ policy You can associate a collection of classes with one or more policies. Create and configure a DiffServ policy To create and configure a DiffServ policy: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select QoS > DiffServ > Advanced > Policy Configuration. The Policy Configuration page displays. 6. In the Policy Name field, enter a policy name. The policy class name can be 1 to 31 alphanumeric characters in length. 7. From the Policy Type menu, select the traffic flow direction to which the policy must be applied: • In: The policy is applied to inbound traffic. • Out: The policy is applied to outbound traffic. 8. From the Member Class menu, select an existing class that you want to associate with the new policy. 9. Click the Add button. The new policy is added. 10. After creating the policy, click the policy name. The policy name is a hyperlink to the page on which you can define the policy attributes (see the following figure, which does not show the Two Rate section of Configure Quality of Service 480 Main User Manual