Netgear GSM4248P User Manual - Page 86

AV Line of Fully Managed Switches M4250 Series Main User Manual 5. Select System > Management > DNS > Host Configuration. The Host Configuration page displays. 6. Select the check box next to the entry to update. 7. Enter the new information in the appropriate field. 8. Click the Apply button. Your settings are saved. 9. To clear all the dynamic host name entries from the list, click the Clear button. 10. To save the settings to the running configuration, click the Save icon. The dynamic host mapping table shows host name-to-IP address entries that the switch learned. The following table describes the dynamic host fields. Table 20. Dynamic Host Mapping information Field Host Total Elapsed Type Addresses Description Lists the host name that you assign to the specified IP address. Time since the dynamic entry was first added to the table. Time since the dynamic entry was last updated. The type of the dynamic entry. Lists the IP address associated with the host name. Switch database management template A switch database management (SDM) template determines the maximum resources the switch can use for various features. SDM templates allow different combinations of scaling factors and therefore allocations of resources, depending on how the switch is used. That is, SDM templates let you reallocate switch resources to support a different combination of features based on your network requirements. The following table shows how the hardware resources are divided. Configure Switch System 86 Information Main User Manual