Netgear GSM4248P User Manual - Page 493

AV Line of Fully Managed Switches M4250 Series Main User Manual • To search by member class, select Member Class, enter the member class, and click the Go button. If an entry with a matching member class exists, the entry is displayed as the first entry, followed by the remaining entries. An exact match is required. 7. To refresh the page, click the Refresh button. The following table describes the nonconfigurable fields on the page. Table 139. DiffServ Service Statistics information Field Interface Direction Policy Name Operational Status Description The interface with a DiffServ policy attached. The direction (In or Out) for which the DiffServ policy is attached. The name of the DiffServ policy. If more than one class is attached to the policy, each policy instance (with the same policy name) is displayed. The operational status of the DiffServ policy (Up or Down). The status is displayed as Up if all of the following conditions are true: • The attached class is valid and includes at least one matching rule. • The attached policy is valid and includes at least one attribute. • The port is enabled, that is, the physical link of the port is in the up state. Member Classes Offered Packets Discarded Packets All DiffServ classes that are defined as members of the selected policy name. Select a member class name to display its statistics. If no class is associated with the selected policy, then the list is empty. The total number of packets offered to all class instances on this service policy before their defined DiffServ policy treatment is applied. This is the total number for the interface and direction. The total number of packets discarded for any reason for all class instances on this service policy when the DiffServ policy treatment is applied. This is the total number for the interface and direction. Configure Quality of Service 493 Main User Manual