Netgear GSM4248P User Manual - Page 487

AV Line of Fully Managed Switches M4250 Series Main User Manual 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select QoS > DiffServ > Advanced > Policy Configuration. The Policy Configuration page displays. 6. Select the check box next to the policy name. 7. In the Policy Name field, specify the new name. 8. Click the Apply button. Your settings are saved. 9. To save the settings to the running configuration, click the Save icon. Change the policy attributes for an existing DiffServ policy To change the policy attributes for an existing DiffServ policy: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select QoS > DiffServ > Advanced > Policy Configuration. The Policy Configuration page displays. 6. Click the policy name, which is a hyperlink. The page on which you can change the policy attributes displays. 7. Change the policy attributes as needed. 8. Click the Apply button. Your settings are saved. Configure Quality of Service 487 Main User Manual